The Dolphin 2x2 model has been upgraded for years of reliable pool cleaning service. With a new scanning program and user-friendly options, the Dolphin 2x2 is sure to meet anyone’s cleaning needs. NEW FEATURES INCLUDE:The new COP microprocessor with Flash technology features a more accurate scanning program allowing for more accurate and efficient cleaning. Operation and control through a user-friendly remote control allows the operator to modify and customize the automatic scanning program according to their requirements by changing the following parameters Cleaning Mode Selections:- Regular- Ultra clean- greater suction, slower speed- Waterline cleaning- Lap pool program Programmable wall climbing mode- Program your 2x2 to clean up to the water line or to clean the bottom only.Climbing frequency programmable by user.

Program your 2x2 to climb the walls every 8, 16 or 32minutes. (Default- no minutes)Programmable pool lengths- 30m, 40m, 50m or 60m. Length.Programmable Cycle Time- 4,6, or 8 hours. (Default, 6hrs)Impact Sensor- for wall or obstacle detection. If the vacuum encounters obstacles in the pool, i.e., ladder, bulk head, etc. It will automatically reverse its direction so it does not waste valuable cleaning time Cord Swivel will help prevent cord twisting and tangling.Full filter bag indicator light on the power supply that will indicate when the filter bags are half full to full and need to be emptied. Air Sensor- for beach entry pools will turn vacuum around automatically.The Dolphin 2x2 comes with a 131ft. floating cable with swivel and Kevlar reinforcing. The Dolphin 2x2 runs off of low voltage to maximize safety. It is CE approved. Vacuum weight- 41 lbs. No Installation Required.